Share Industrial solutions
Steel strapping tools
Tool type
Strap width
Joint type
SPECTA SUMO
SPECTA SUMO tensioner is a light and compact tool for strapping of different products.

Tension force is easily adjusted by changing pressure. When strapping is complete, the knife at the tensioner’s end helps breaking the strap easily.

The tensioner is used along with the seal press for full-cycle packaging.

The strap is joined by sealer tool with push type seals.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Air pressure,
bar
Width, mmThickness, mm
SPECTA
SUMO
19-320.5-1.280004.54-6

Download brochure

SPECTA SUMO 764
SPECTA SUMO764 Tensioner is a pneumatic compact tool for strapping of different flat- and round-surface cargo.

It is used along with the sealer tool for full-cycle packaging.

The maximum tightening speed is up to 6 m/min.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Air pressure,
bar
Width, mmThickness, mm
Tensioner
SUMO 764
19, 25, 320.6-1.190004.25-6.5

Download brochure

SPECTA KATANA
SPECTA KATANA Sealer is a light and compact pneumatic tool for strapping with a special push type seal, with two notches on each side.

The tool is easy to handle: one touch strapping!

It is used with a strap tensioner.

ModelStandard and HT strapWeight,
kg
Seal width,
mm
Air pressure,
bar
Width, mmThickness, mm
Sealer
KATANA
19, 25, 320.5-1.24.745 min.4-6

Download brochure

SPECTA KATANA 774
SPECTA KATANA 774 is a pneumatic sealer for strapping flat and round-surface products.

It is designed for strapping with special push type seals, with two notches on each side. It is applied along with a strap tensioner.

ModelStandard and HT strapWeight,
kg
Seal width,
mm
Air pressure,
bar
Width, mmThickness, mm
Sealer
KATANA 774
19, 25, 320.6-1.1
(standard)

0.63-0.9
(HT)

5.1454-6

Download brochure

SPECTA SAMURAI
SPECTA SAMURAI is distinguished with high tension force and is intended for pneumatic steel strapping of pipes, wire coils, rods, shapes and other metal products.

It is efficient in heavy duty conditions.

The strap is bound with push type seals, with two down notches on each side.

The tool is extremely user friendly. When you press “1”, the tool pulls up the strap powerfully and quickly. When you press “2”, it seals and cuts the strap. The tool operation is facilitated by hanging.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Seal width,
mm
Air pressure,
bar
Width, mmThickness, mm
SAMURAI19, 25, 320.5-1.280001345-574.4-6

Download brochure

SPECTA SAMURAI 716
SPECTA SAMURAI 716 is a compact pneumatic tool intended for steel strapping of different flat- and round-surface products.

It is widely used for strapping relatively light cargo in steel, metal-working and construction industries.

The strap is joined with push type seals; the minimum seal length is 22 mm.

The maximum strap tightening speed is 5 m/min.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Seal width,
mm
Air pressure,
bar
Width, mmThickness, mm
SAMURAI 71616, 190.4-0.8
(standard) 0.4-0.63
(HT)
45004225.5-6.5

Download brochure

SPECTA SAMURAI 742/752
SPECTA SAMURAI 742 and 752 are pneumatic tools for strapping of flat and round-surface products.

They are widely used in the steel and metal working industries.

The strap is joined with push type seals, with two upper notches on each side. The minimum seal length is 45 mm. The tool operation is facilitated by hanging, using a hook. The maximum strap tightening speed is 6 m/min.

Specta Samurai 752 operates at low pressure, from 4.5 at.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Seal width,
mm
Air pressure,
bar
Width, mmThickness, mm
SAMURAI 742 SAMURAI 75219, 25, 320.6-1.0
(standard) 0.63-0.8
(HT)
90001045
min.
5.5-6.5

Download brochure

Download brochure

SPECTA PRESTO
Pneumatic sealless tool SPECTA PRESTO is widely used for strapping industrial products with flat and round-shaped surfaces. It has small weight.

Bond type – notch sealing

The tool combines pneumatic tensioner and mechanical notching device

The minimum flat surface length of packaged products is 150 mm.

The minimum round surface diameter is 1 000 mm.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Air pressure,
bar
Width, mmThickness, mm
SPECTA
PRESTO
13, 16, 19

0,4 – 0,63 (0,8* – option)
(Standard)
0,4 – 0,63 (HT)

55005.36-7
SPECTA PEGAS
Pneumatic sealless tool SPECTA PEGAS is widely used for strapping products with flat surface.

Bond type – notch sealing.

The minimum flat surface length of packaged products is 200 mm.

ModelStandard and HT strapMax.
tension,
N
Weight,
kg
Air pressure,
bar
Width, mmThickness, mm
SPECTA
PEGAS
13, 16, 19

0,4 – 0,63 (Standard)
0,4 – 0,63 (HT)

550096-7
SPECTA KRONOS A333
It is widely used in metalworking, woodworking and construction materials production.

This handy mobile tool uses steel strap type Specta Prima, Specta Factor with break load up to 850 N/mm².
Joint type – notch sealing.
The tool design is notable for ruggedness and high reliability and permits a very easy and efficient operation.

ModelStrap width,
mm
Strap tchickness, mmWeight,
kg
KRONOS A33316-190.633.9

Pneumatic tools are suitable for heavy use in the steel and metals industries, metals processing and steel service centres, where durability and high speed are critical requirements. These strapping tools are suitable for the packaging of products with various shapes.

Contact us

    Contact us
    Learn the cost, delivery time and special offers for new, regular customers
    Captcha:
    captcha