Choppers are designed to cut wastes of polyester and steel straps. The use of the chopper helps to reduce waste disposal costs of packing straps.
A large European PET and steel strap producer
Choppers are designed to cut wastes of polyester and steel straps. The use of the chopper helps to reduce waste disposal costs of packing straps.
The device is installed on a barrel, or a stand, or a specially designed table (option).
The motor power is 0.37 kW, and the strap infeed speed is 37 meters per minute.
| Materials to be chopped | Dimensions |
|
|
Operating principle
Insert the strap into the feed socket. The clamping rollers will grab the strap and pull it to the rotating knives until the material is consumed or the operator stops the rollers using the release lever.
DESIGN STRENGTHS
This chopper is notable for its increased capacity and tandem feed drive system. The drive of both feed rollers enables the device to handle wastes in a quick and efficient way. Thus the chopper may be used to cut a large amount of entangled plastic strap, 19 mm steel strap with clips, light-weight wire and other production materials. The chopper’s universal design allows the user to build it into the slitter line for steel strap or steel cuttings to provide collection of waste.
The 0.75 kW motor ensures an outstanding infeed speed of 36 meters per minute and high performance rate. The wide feed socket makes it easy for the operator to supply waste to the device. The chopper may be completed with a safe wheeled table (option).
| Materials to be chopped | Dimensions |
|
|
Operating principle
Place the material into the feed socket. The clamping rollers will grab the strap and pull it to the rotating knives until the material is consumed or the operator stops the rollers using the release lever.
DESIGN STRENGTHS
The chopper has a variety of customizable options to meet any specific scrap disposal needs. The chopper is installed on a special table with an embedded container to collect cut wastes. Different models of tables are available as an option.
The motor power is 1.12 kW, and the infeed speed is 27 meters per minute.
| Materials to be chopped | Dimensions |
|
|
Operating principle
Place the material into the feed socket. The clamping rollers will grab the strap and pull it to the rotating knives until the materialis consumed or the operator stops the rollers using the release lever.
DESIGN STRENGTHS
Form is deprecated, please cotact the webmaster to upgrade this form.